Application Areas
Agriculture, Automotive, Building, Decoration, Industry, Marine
Application
Metal surfaces such as iron, aluminum, steel, sheet metal, body parts end plastics.
How To Use
Carefully clean and sand the surface to help increase adhesion of the product. The surface must be completely dry before applying the product, then select the right product for your specific application: apply V400PRIMER3 for bodywork surfaces and metallic parts or apply V400PRIMER5 for galvanized sheets surfaces. After 48 hours apply V400 AGRI line. Don’t use the product at a humidity rate higher than 80%.
- Vigorously shake the can for at least 1 minute, until you hear the inner marbles move freely. It is also suggested to occasionally shake the cylinder even during use;
- Carefully clean the surface before application;
- Test in a hidden area to verify compatibility of the surface with the paint.
Spray
- Apply a first hand / coat light to improve coverage and adherence, to reduce the possibility of dropping. Apply from a distance of 20-30 cm;
- After a few moments apply a second horizontal hand/coat immediately followed by a third vertical hand /coat;
- Let dry a few minutes;
- After use, it’s advisable to spray for 2/3 seconds with the spray upside down, to avoid the block of the actuator;
- After 24h, proceed with the normal use of painted piece.
Modality Of Storage
Before using: stock the product in a dry location and don’t stock it with a temperature under 5°C and over 45°C, after the use, keep containers closed. In the original package, the product can be conserved for 24 months (warranty). The product doesn’t expire. After the first usage: conserve in a fresh and dry location, away from hot spring. Keep out of reach of children.
