A very special premium dry diamond core with laser welded segments which are jam packed with the most advanced metal bond technology and top spec diamonds. EVODRILLS are designed for dry drilling not only building materials but hard materials too, such as lightly reinforced concrete, clay products and Indian sandstone. The spiral barrel helps remove debris and increases air flow to the cutting edge while the superior segments drill faster and more efficiently than other dry cores.

SPECIFICATIONS
38 x 150mm

SUITABLE FOR USE ON
Bricks - Class A Engineering
Bricks - Class B Engineering
Bricks - Standard Facing Bricks
Clay Products
Concrete - General Purpose
Concrete - Light Steel Reinforcement
Concrete Blocks - Lightweight 3 to 7 Newton
Concrete Blocks - Medium Density 7 to 12 Newton
Concrete Blocks - Solid Density 12+ Newton
Sandstone - Abrasive
Sandstone - Indian

MACHINE SUITABILITY
Dry Diamond Core Drill
SDS Plus Drills with Slipping Clutch

USAGE ADVICE
Maximum performance can be achieved by using a purpose made dry diamond core drill fitted with a slipping clutch. These machines are a minimum of 850 watts and have a high RPM to ensure the diamond segments work to their full potential. SDS plus drills can be used to dry core drill, although the lower RPM will result in slower drilling, especially in harder and/or damp materials.
N.B. Dry diamond core drills should not be used on hammer action.

STANDARDS
EN13236: European Standard that regulates the safety requirements for super abrasive (diamond) products