SUITABLE FOR USE ON
Tiles - Ceramic
Tiles - Granite
Tiles - Limestone
Tiles - Marble
Tiles - Porcelain
Tiles - Slate

MACHINE SUITABILITY
Angle Grinder

USAGE ADVICE
Mark the tile and place the drill tip at a 45-degree angle.
Start drilling and level the drill once the tile surface is scored.
Drill using a slight oscillating motion until the hole is complete.
If drilling continuous holes, it is recommended to dip the drill tip in water after each hole to re-solidify the wax.
Do not use unnecessary pressure, the weight of the machine is sufficient.
Use at speeds between 800 - 2000rpm.

STANDARDS
EN13236: European Standard that regulates the safety requirements for super abrasive (diamond) products