• This primer is designed to be used as the strong base coat to ensure the perfect adhesion of all enamel spray on difficult surfaces such as metal alloys and metals. 
• It protects metal surfaces from rust. 
• Also suitable as a filler in bodywork car sector for small imperfections and scratches. 
• Clean carefully the surface before application and shake vigorously the can. 
• For overcoating are required at least 24/48 hours.
• After use, it’s advisable to spray for 2/3 seconds with the can upside down to avoid the block of the nozzle.

Application Areas 
Agriculture, Automotive, Building, Decoration, Hardware, Home, Industry, Marine

Fields Of Application 
Metal surfaces as iron, aluminum, steel, glass and plastics, bodywork. Apply at room temperature: Min 5°C – Max 35°C

Instructions For Use
- Vigorously shake the can for at least 1 minute, until you hear the inner marbles move freely. It is also suggested to occasionally shake the cylinder even during use;
- Carefully clean the surface before application;
- Test in a hidden area to verify compatibility of the surface with the paint.

Spray
- Apply a first hand/coat light to improve coverage and adherence, to reduce the possibility of dropping. Apply from a distance of 20 cm;
- After a few moment apply a second horizontal hand/coat immediately followed by a third vertical hand-coat;
- Let dry a few minutes;
- After use, it’s advisable to spray for 2/3 seconds with the spray upside down, to avoid the block of the actuator;
- After 24h, proceed with the normal use of painted piece.

Modality Of Storage 

Before using: stock the product in a dry location and don’t stock it with a temperature under 5°C and over 45°C, after the use, keep containers closed. In the original package, the product can be conserved for 24 months (warranty). The product doesn’t expire.
After the first usage: conserve in a fresh and dry location, away from hot spring. Keep out of reach of children.