Bonds > Wood, MDF, laminates, leather, cork, rigid PVC, metal, concrete, plaster, stone, ceramic, and more!**
Great for > Large surfaces, flooring, furniture repairs & counter tops, wall coverings and decorative tiles
100% Waterproof > Great for projects both inside and out!
* Heavier objects may require extra support
**Not suitable for use on polyethylene (PE), polypropylene (PP), polystyrene (PS), treated MDF, foam backing laminates or PVC pipes
Prepare > Protect work area from spills. Ensure surfaces to be bonded are clean, dry and free from dust or debris
Apply > Using a spreader, apply a thin, even coat of adhesive to each surface to be bonded. Best results achieved when applied at room temperature
Wait > Allow for adhesive to partially dry before positioning surfaces (approximately 15-20 minutes)
Press > Press surfaces firmly together when final position is achieved. Allow a minimum of 24 hours for a full cure. Cure time is dependent on the amount of adhesive applied and may increase with lower application temperatures and when used on non-porous surfaces
Clean-up and Storage > Wipe uncured adhesive with a dry cloth and clean with acetone, isopropyl alcohol, or citrus-based solvents according to manufacturer’s instructions. Cured adhesive may be removed by scraping from the surface. Replace lid tightly and store in a cool, dry place away from children and animals
For The Toughest Jobs On Planet Earth®
Safety Data Sheet