Gorilla® Heavy Duty Spray Adhesive is a multi-purpose* fast-drying mist spray; high strength and laced with Gorilla’s trademark toughness for heavy duty DIY projects, whilst still being easy to use for smaller projects and crafts. 

It provides a permanent bond on surfaces such as wood, metal, fabric, plastic**, paper, glass, leather, stone and ceramics. And being weather resistant, it can be used both indoors and out.  

This adhesive mist offers the best of both worlds - repositionable, so once applied you have up to 5 minutes to re-adjust and get it right but also fast-drying – no waiting for hours for it to take hold. Gorilla Heavy Duty Spray Adhesive dries clear, making it ideal for a wide variety of projects including DIY and craft projects, photo mounting, upholstery and use around the office. 

*Do not use for mounting weighted materials **Not recommended for use on vinyl materials, polyethylene(PE), polypropylene(PP) or polystyrene(PS) plastics.

Preparation
All surfaces should be clean and free of dirt, grease and oil. Protect surrounding areas from overspray to avoid residual adhesive.

Application
Shake can well before using. Hold the can 15-20cm from surfaces to be bonded.

For Maximum Bond Strength: Spray an even coat of adhesive to both surfaces to be joined. Allow adhesive to partially dry (for approximately 1 minute) before positioning surfaces together.

For Repositionable Bonds: Spray a light even coat on one surface. Allow to dry 1-3 minutes before joining. Repositionable for up to 5 minutes depending on surface type. To remove, gently peel from corner. After 5 minutes, bond becomes permanent.

Storage
After completing the project, turn the can upside down and spray a short jet of clear gas away from the body. Wipe nozzle with a dry cloth and clean with isopropyl alcohol according to solvent manufacturer’s instructions. 

Store in a cool, dry place away from children and animals. Do not store above 48°C.